On-Site Report | Taiwan | September 2026
ITRI is far less well known in Europe than some of the companies it helped create. Yet the Industrial Technology Research Institute, founded in Taiwan in 1973, played a role in the emergence of companies such as UMC and TSMC. During our visit to Hsinchu, however, the past itself was not the most interesting part. What stood out was the system in which research, intellectual property and industrial application continue to build on one another.
Author: Botond Barabás | ImportExport.hu
After visiting ITRI's Hsinchu headquarters, one thing became clear: it is difficult to describe the institution in a single word. It is not a university, not a company, and not a conventional research institute either. Perhaps that is precisely the point.
ITRI's role does not end when a scientific or technological result is achieved. It operates between applied research and industry, in the space where a promising idea must become a functioning technology and, where possible, an economically viable solution.
During our September visit, ITRI staff guided us through the institute's history and several of its current development areas. The openness of the reception was remarkable in itself: they showed us not only their achievements, but also the way of thinking that shapes the institute's operation. It soon became clear that ITRI's history is, in part, also the story of Taiwan's industrial transformation.
A Breakfast, a Silicon Wafer and the Birth of an Industry
ITRI was founded in 1973. According to the institute's current official profile, it employs more than 6,500 people and its mission is to drive industrial development through technology research and development, create economic value and generate social benefit.
One of the most memorable stops in the historical exhibition recalls an apparently ordinary event. In 1974, seven experts and decision-makers met over breakfast to discuss how Taiwan's largely labour-intensive industry could move towards a higher technological level. The exhibition links this moment to a silicon wafer approximately 7.6 centimetres in diameter: the participants saw integrated circuits as one possible direction for development.
In hindsight, it is easy to see this development as inevitable. At the time, however, it was a strategic decision. In 1976, ITRI signed a technology-transfer agreement with the US company RCA to acquire integrated-circuit manufacturing know-how. Taiwanese engineers travelled to the United States for training, and in 1977 ITRI completed an integrated-circuit demonstration plant. The knowledge acquired was not kept within the institute: UMC (United Microelectronics Corporation) was spun off from ITRI in 1980, followed by TSMC (Taiwan Semiconductor Manufacturing Company) in 1987.
The creation of TSMC was particularly significant because the company made the pure-play semiconductor foundry model a core business principle. In essence, a company designing chips no longer needed to build its own extremely capital-intensive fabrication plant; manufacturing could be entrusted to a specialist partner. This division of labour later became one of the foundations of Taiwan's semiconductor ecosystem.
This story also illustrates one of ITRI's operating principles: the objective is not necessarily for the institute to retain a technology itself. Value becomes tangible when industry can use it, develop it further and bring it to market.
Bridging the Gap Between Research and the Market
In its written responses to ImportExport.hu, ITRI described its role as a bridge between scientific research and industrial application. It focuses particularly on the stage at which a promising research result must be turned into a functioning, demonstrable technology that can also be tested in an industrial environment.
This level of development maturity is commonly described internationally using TRL, or Technology Readiness Level. ITRI works primarily in the TRL 3–6 range, from experimental proof of concept through prototypes to the point where a technology can be demonstrated in a relevant environment. This is one of the riskiest stages of innovation. The research result already exists, but its commercial viability has not yet been proven, so the investment risk for companies remains high.
ITRI reduces this technological and commercial uncertainty through prototypes, pilot systems, testing, validation and engineering development. The route to market may include joint research and development, technology transfer, licensing, corporate testing, incubation or even the creation of a new company.
The scale of the model is illustrated by the 2024 figures. In that year, ITRI was granted 726 patents, held a total of 15,512 valid patents, and supported companies through 679 technology transfers.
Behind these figures, however, lies an even more important connection. During the visit, it was striking how much importance ITRI places on knowledge sharing within the organisation. Different research fields do not operate as isolated islands: the result of one development can become a building block for another technology. At the same time, considerable attention is paid to patents, ownership rights and the protection of intellectual property in general.
ITRI highlighted the same collaborative, interdisciplinary approach in its written response. Within one organisation, expertise in semiconductors, information and communications technology, mechanical engineering, advanced materials, biomedicine and green energy comes together. This makes it possible to address complex industrial challenges rather than only isolated technical problems.
They Are Not Developing a Single Technology of the Future – They Are Building a System Around Them
Perhaps this was one of the most important lessons of the visit. ITRI's exhibition space brings together developments in semiconductors, smart manufacturing, mechanical engineering, advanced materials, healthcare technologies, energy, robotics and unmanned systems. At first glance, these may appear to be separate fields. The operating logic, however, is based precisely on connecting them.
A new materials technology can be used in a vehicle. Precision manufacturing technology can support the production of components for electric vehicles. Artificial intelligence can be combined with robotics, manufacturing automation or autonomous systems. An energy technology can, in turn, become a foundation for the operation of other technologies.
ITRI's current strategic research areas reflect the same approach. The institute focuses on smart living, health, sustainable environments and societal resilience, supported by enabling technologies such as artificial intelligence, semiconductors, communications and other digital solutions.
From a European perspective, it is easy to reduce Taiwan's technological success to TSMC or semiconductor manufacturing in general. After visiting Hsinchu, however, a more interesting picture emerges. For more than five decades, ITRI has not merely produced research results: it has helped launch companies, transferred technologies to industry, built engineering expertise, created intellectual property and connected research with corporate application.
The Taiwanese model cannot, of course, be copied one-to-one in Europe or Hungary. The industrial structure, historical background, economic policy and technology ecosystem are different. Yet the underlying questions are familiar to us as well: what happens to a good idea after it is created? Is there an institution, capital, engineering capacity and an industrial partner capable of taking it forward? Who assumes the risk when a technology has become more than a research result but is not yet a marketable product?
ITRI's more than five decades of operation are interesting not because they provide a ready-made formula for every country, but because Taiwan began addressing these questions at a systemic level.
And perhaps this was the most important lesson of the Hsinchu visit. We did not leave with the memory of one spectacular invention, but with the recognition that innovation alone does not equal competitiveness. It also requires a system capable of taking an idea from the research laboratory to the global market.
Coming next: In connection with its visit to ITRI in Hsinchu, ImportExport.hu also conducted a written interview with the institute. In the next part, we examine how ITRI works with foreign companies and research organisations, what opportunities it sees in Europe, and which points of connection it identifies for Hungary and Central and Eastern Europe.
Sources: ITRI Overview – official institutional profile (itri.org.tw); ITRI – institutional history of the development of Taiwan's semiconductor industry (itri.org.tw); ITRI Sustainable Development – 2024 R&D, patent and technology-transfer data (itrisdgs.itri.org.tw); ITRI's written interview responses provided to ImportExport.hu, 2026.




